Aquatec Orca bath lift
- Type: Bath lift, battery-powered
- Colour: White
- Seat width: 375 mm (715 mm with side flaps)
- Seat depth: 590 mm
- Seat height: 60–420 mm
- Backrest width: 360 mm
- Backrest height: 665 mm
- Backrest tilt: up to 40°
- Base area: 580 × 295 mm
- Overall height: 1.075 mm
- Overall depth: 650 mm (upright), 920 mm (reclined)
- Weight: 10.8 kg without hand control
- Battery: Lithium-ion
- Load capacity: up to 140 kg
€880.60
Free shipping
Available, delivery time: 3-4 weeks
Question about this product
Tell us about your device and we will let you know whether the part fits.
Prefer WhatsApp? You can send us a photo of the type plate or the part here via WhatsApp.
Product information "Aquatec Orca bath lift"
Take a full bath without having to strain getting in and out over the rim of the tub: The Aquatec Orca Lowers you into the water at the touch of a button and lifts you out again after bathing. This keeps the bath usable even when sitting down and standing up is difficult. The battery-powered lift supports up to 140 kg.
Aquatec Orca overview
The bath lift has a robust frame with a reinforced lifting scissor mechanism and stands in the bath on suction cups. It is controlled via an ergonomically shaped hand control unit that is waterproof and floats. An emergency stop button is provided. The drive system is maintenance-free and is powered by a lithium-ion battery; the cells are based on manganese and, according to the manufacturer, are deep-discharge protected and free of memory effect. The battery and plug-in charger are included in the scope of delivery.
Once you are below the water surface, the backrest can be tilted backwards by up to 40°. The smooth surfaces are quickly wiped clean.
The suitable version
- Folding backrest with upholstery (1571773): Seat and back have white complete covers. They can be unbuttoned and washed in the washing machine with mild detergent at no more than 60 °C.
- Reclining backrest without upholstery (1573863): You sit directly on the smooth surface of the lifter. According to the manufacturer, the Orca can in principle also be used without a cover.
- Lowerable special backrest support with cover (1573970): Instead of the standard backrest, a special back support is fitted. Together with the stopper available as an accessory, it is intended to prevent sliding off the seat.
For a body weight up to 170 kg, the Aquatec Orca XL is available as a separate model.
The Orca and your bath
According to the manufacturer, the Orca fits almost all commercially available bathtubs. Its base measures 580 × 295 mm, the overall height is 1,075 mm, the overall depth is 650 mm with the backrest upright and 920 mm with the backrest reclined. The seat is 375 mm wide without side flaps and 715 mm wide with side flaps, and 590 mm deep. The seat height ranges from 60 mm in the lowest position to 420 mm in the highest position. For bathtubs with a depth of 430 mm or more, height adapters are required; with up to three adapters, the lifter can be raised by a total of 6 cm. For unusual bathtub shapes, the side flaps are available as a custom-made special version on request.
Transport and storage of the Orca
The lifter consists of two parts that can be quickly assembled and separated again. Thanks to the folding mechanism, it can be stored in a space-saving way. The weight is 10.8 kg without the hand control unit; the backrest alone weighs 4.2 kg, the hand control unit 0.4 kg. A carrying bag with wheels is available as an accessory.
The equipment at a glance
- Frame: robust, with reinforced lifting scissor
- Drive: maintenance-free, lithium-ion battery
- Operation: waterproof, buoyant hand control unit
- Backrest: Lowerable, tilt up to 40°
- Hold in the tub: Suction cups
- Scope of delivery: Battery and plug-in charger
- Colour: White
- Load capacity: up to 140 kg
| Maximales Nutzergewicht: | 140 kg |
|---|---|
| Product family: | Aquatec Orca |
- Download "Gebrauchsanweisung" (4.68 MB)
- Download "Konformitätserklärung" (540.78 KB)
- Download "Produktinformation" (6.18 MB)
Invacare GmbH
Am Achener Hof 8
88316 Isny im Allgäu
Germany
Email: kontakt@invacare.com
Telephone: +49 7562 700-38
The manufacturer is established in the European Union and is also the responsible person.
Invacare GmbH
Am Achener Hof 8
88316 Isny im Allgäu
Germany
Email: kontakt@invacare.com
Telephone: +49 7562 700-38
- Type: Bath lift, battery-powered
- Colour: White
- Seat width: 375 mm (715 mm with side flaps)
- Seat depth: 590 mm
- Seat height: 60–420 mm
- Backrest width: 360 mm
- Backrest height: 665 mm
- Backrest tilt: up to 40°
- Base area: 580 × 295 mm
- Overall height: 1.075 mm
- Overall depth: 650 mm (upright), 920 mm (reclined)
- Weight: 10.8 kg without hand control
- Battery: Lithium-ion
- Load capacity: up to 140 kg
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
Compatible accessories