Stricker towing hitch with cross tube for folding wheelchairs
- Suitable for: Folding wheelchairs
- Fastening: on the side tubes of the wheel axle, with half-shells on both sides
- Width: adjustable via clamp
- Removal: pull out two spring pins, remove the tube
- Ball head: 25 mm
€228.48
Available, delivery time: 1-2 weeks
Product information "Stricker towing hitch with cross tube for folding wheelchairs"
The Towbar with cross tube is the Stricker solution for Folding wheelchairs. With it, the transporter, the Römer and common bicycle trailers can be attached to the wheelchair.
Mounting on folding wheelchair
The cross tube is attached to the side tubes of the wheel axle – via the half shells on both sides. The tube width is flexibly adjusted to the required width with the clamp that holds the two tubes together.
Quickly removed – the wheelchair remains foldable
To dismantle, pull out the two spring clips and remove the tube from the holder. This takes only a few steps, so the wheelchair can be folded again shortly afterwards.
Hooking and unhooking the trailer
The ball head has a diameter of 25 mm and is therefore compatible with common trailer types. To hitch and unhitch, remove the spring clip that secures the trailer against accidental slipping out – this takes only a moment.
The matching coupling for your wheelchair
For Rigid frame wheelchairs available with quick-release clamp or screw-type. As a set with the transporter this coupling is called Transporter Flex.
| Assembly: | Frame & attachments |
|---|---|
| Ball joint: | 25 mm |
| Product type: | Tow hitch |
R & E Stricker Reha-Entwicklungen GmbH
Klotzbergstraße 64
77815 Bühl
Germany
Email: info@stricker-handbikes.de
Telephone: +49 7223 72510
The manufacturer is established in the European Union and is also the responsible person.
R & E Stricker Reha-Entwicklungen GmbH
Klotzbergstraße 64
77815 Bühl
Germany
Email: info@stricker-handbikes.de
Telephone: +49 7223 72510
- Suitable for: Folding wheelchairs
- Fastening: on the side tubes of the wheel axle, with half-shells on both sides
- Width: adjustable via clamp
- Removal: pull out two spring pins, remove the tube
- Ball head: 25 mm
Login