Tetra Equipment Tetra-Gripp handrim, plastic-coated
- Material: Aluminium, fully coated with anti-slip plastic layer
- Sizes: 22, 24, 25, 26 and 28 inch
- Fastening: 6 holders, 4 holders, 6 threaded sleeves or 5 threaded sleeves
- Dimensional specification: Inner rim diameter depending on version in the variant selection
- For: Wheelchair users with absent or limited hand and finger function
€154.70
Available, delivery time: 1-2 weeks
Product information "Tetra Equipment Tetra-Gripp handrim, plastic-coated"
The Tetra-Gripp is an aluminium handrim fully covered with an anti-slip plastic coating. It is intended for wheelchair users whose hand and finger function is absent or limited: when propelling, the pressure of the heel of the hand is enough to provide good grip. The manufacturer calls it its classic.
At a glance
- Aluminium handrim, fully coated with anti-slip plastic layer
- Very durable coating, provides optimal grip when propelling
- Twist- and slip-resistant, extremely light, retains grip for a long time
- Sizes 22, 24, 25, 26 and 28 inch
- Fixing with 6 holders, 4 holders, 6 threaded sleeves or 5 threaded sleeves
Versions and article numbers
- Article number 503226: 22 inch, rim inner diameter 465 mm, 6 holders
- Article number 406236: 24 inch, rim inner diameter 490 mm, 6 spokes (for off-road wheels with bent spokes)
- Article number 501246: 24 inch, rim inner diameter 515 mm, 6 holders (for hollow-chamber and Spinergy rims)
- Article number 407246: 24 inch, rim inner diameter 520 mm, 6 holders (extra-long, coated spacers so that the thumb fits between rim and handrim (distance approx. 39 mm))
- Article number 402244: 24 inch, rim inner diameter 523 mm, 4 holders (for standard rims)
- Article number 401246: 24 inch, rim inner diameter 523 mm, 6 holders (for standard rims)
- Article number 405256: 25 inch, rim inner diameter 535 mm, 6 holders
- Article number 502266: 26 inch, rim inner diameter 565 mm, 6 holders
- Article number 410286: 28 inch, rim inner diameter 595 mm, 6 holders
- Article number 301246N: 24 inch, rim inner diameter 520 mm, 6 threaded sleeves (for example for Golz Six-Star and Twin-Star wheels)
- Article number 302246N: 24 inch, rim inner diameter 515 mm, 6 threaded sleeves (for Loopwheels)
- Article number 303256N: 25 inch, rim inner diameter 539 mm, 6 threaded sleeves (for Loopwheels)
- Article number 303245N: 24 inch, rim inner diameter 515 mm, 5 threaded sleeves
Frequently asked questions
The suitable version for your wheel
The decisive factors are the inner rim diameter and the type of fastening. The manufacturer specifies the inner rim diameter for each version; for threaded sleeves, measurement is taken from centre to centre. The table lists for each article number the size, diameter, fastening and, where available, a note on the intended use.
One version for Loopwheels
Yes. The versions 302246N (24 inch, 515 mm) and 303256N (25 inch, 539 mm), each with 6 threaded sleeves, are intended by the manufacturer for Loopwheels.
The space for the thumb
Version 407246 has extra-long, coated spacers so that the thumb fits between rim and handrim; the distance is approx. 39 mm.
| Handrim mounting: | 6 holders |
|---|---|
| Material: | Aluminium |
| Product family: | Tetra Equipment Tetra-Gripp |
| Product type: | Handrim |
| Rim inner diameter: | 515 mm |
| Size (inches): | 24" |
Tetra-equipment GmbH
Weiherweg 3
89299 Unterroth
Germany
Email: info@tetra-equipment.de
Telephone: +49 7343 929948
The manufacturer is established in the European Union and is also the responsible person.
Tetra-equipment GmbH
Weiherweg 3
89299 Unterroth
Germany
Email: info@tetra-equipment.de
Telephone: +49 7343 929948
- Material: Aluminium, fully coated with anti-slip plastic layer
- Sizes: 22, 24, 25, 26 and 28 inch
- Fastening: 6 holders, 4 holders, 6 threaded sleeves or 5 threaded sleeves
- Dimensional specification: Inner rim diameter depending on version in the variant selection
- For: Wheelchair users with absent or limited hand and finger function
Login