Castors and front wheels
Castor and front wheels for wheelchairs, rollators and mobility devices – from 50 mm to 12 1/2 inches. The range includes solid rubber wheels, polyurethane wheels, pneumatic wheels and Flexel wheels, skater wheels also with LEDs, fibre and aluminium wheels in several colours, as well as CorMORun designer wheels from Rolko, wheels with carbon, hollow-spoke and plastic rims, and rollator wheels.
Diameter, width and hub width are what matter – all three must match the fork. The dimensions are given in the product name, for example 150 × 30 mm, and under the properties. Large wheels with a handrim can be found under Drive wheels, swivel castors with a fork for beds and lifts under Castors.
12" polyurethane wheel, 300 x 45 mm, with drum brake, ø12 x 114 mm axle, left
12" polyurethane wheel, 300 x 45 mm, with drum brake, ø12 x 114 mm axle, right
What a castor means in everyday use
Small castors turn easily and need little space, ideal for narrow flats. Large castors roll confidently over kerbs and cobblestones, but need a slightly larger turning circle, and where the drive wheels are angled strongly inwards, the space at the foot should be checked. Between these two extremes lies a decision that shapes the riding feel more than most other features of a wheelchair.
The three dimensions
Diameter and width are usually printed on the wheel, for example 150 × 30 mm. The hub width, i.e. the distance between the inner faces of the fork, is measured with a calliper or read from the axle. If the hub width matches the fork, the wheel sits securely and runs smoothly and true.
Solid or sprung
Solid rubber castors are maintenance-free and run easily, but transmit every jolt directly. Wheels with a softer tread or suspension take much of the harshness out of cobblestones, a real benefit for people who feel vibrations strongly. Twin-wheel castors for equipment run true and are the more stable choice for devices carrying higher loads.
Our tip
If a castor runs unevenly from about walking pace, the wheel itself is rarely to blame. It is usually worth checking the bearing and whether the fork is standing perfectly vertical. Replace the bearing at the same time if the wheel is already removed.