Inner tubes
The inner tube must match the tyre, rim and valve, otherwise it will not hold. Size and valve type decide.
Here you will find inner tubes for wheelchairs and mobility aids in many sizes, including 10 x 2 inches, 12 1/2 x 2 1/4, 16 x 1.75/2.125, 20 x 1 3/8, 22 x 1 3/8, 13 x 5.00-6 and 2.50-8, with a straight car valve or as a 90/90 version.
The size is printed on the old tyre. For the valve type, the hole in the rim decides: if the valve does not fit, a look at the features will tell you which version the inner tube has.
Inner tube Schwalbe, 24 x 3/4 to 24 x 1 inch (20/28-540), straight Schrader valve
The size matches the tyre
A tube usually covers a range, roughly 20 to 28 millimetres in width for the same rim diameter. The diameter is what counts: the second figure in the ETRTO size on the tyre, for example the 540 in 37-540, should match. For the width you have more leeway, because a tube stretches to fit.
The valve depends on the rim
Three types are common. The car valve, also called Schrader, is thick and can be inflated at any petrol station. The Sclaverand valve, also called Presta, is thinner and needs a smaller hole. The car valve with full thread sits especially firmly. Choose the valve to match the hole in your rim, and everything will sit securely and permanently without an adapter.
Straight or angled
With small wheels and deep rims, an angled valve lets the pump attach especially comfortably. Inflating becomes quick and straightforward, just right for anyone who likes to be back on the road promptly.
Our tip
Keep one spare tube for each wheel size. A tube is small, keeps well and costs little. That way you are always well prepared for your next outing.