Quick-release axles
The thru-axle sits in the hub and makes the drive wheel removable. It is secured with a push button and ensures that the wheel stays firmly in place when travelling and can be removed in seconds for transport.
We stock thru-axles with ø 1/2 inch in lengths from 101 to 112 mm, with black or silver push button and chrome-plated, the Spinergy thru-axles 5/8 inch (4.25 and 4.75 inch) as well as nuts (M16 and M18) and black cover caps for the hub.
Measure the length of the old axle and the diameter; both are decisive for the fit in the hub.
Quick-release axle ø1/2" x 99 mm with black push button for Ultralite and X-Core wheel
Easier loading into and out of the car
A quick-release axle makes the wheelchair car-friendly. With it, loading becomes a twenty-second process: press the button, remove the wheel, fold the chair or fold down the back. If you travel by car often, you perform this movement very frequently, so a particularly smooth-running axle pays off every day.
What has to fit
The axle length is determined by the hub width of the wheel and the width of the axle housing on the frame. With the correct length, the balls engage securely and the axle sits properly. The thread type must match the housing, and so must the diameter, usually half an inch. Measure the existing axle before ordering; this information is rarely noted anywhere.
Good to know
Two parts of a quick-release axle are subject to wear in everyday use: the balls that lock into the frame, and the push button. The wheel should only come off when the button is pressed. If it can be released with light pulling, it is time for a new axle. Make sure the wheel clicks audibly into place; then it is secure.
Our tip
A drop of oil on the axle shaft every few months keeps the mechanism running smoothly and looks after the material. Do not use grease, as grease collects dust and the axle will no longer run quite as smoothly.