Back support systems
A back support system supports the back in the wheelchair and keeps the spine in a comfortable posture. It replaces the slack back upholstery with a shaped, usually adjustable back surface.
We stock the Matrx back support systems from Invacare (Elite E2, E2 Deep, MAC, MX2 and PB) as well as the wheelchair backs from JAY (Easy, J3 and J3 Carbon) and the JAY Zip for children.
Height, width and the shape of the back surface in relation to the seating position are decisive. The details are given in the product features.
Firm back, upright sitting
A fabric covering gives way over time, usually within a few months. A firm backrest system keeps the back in shape permanently, supports an upright posture of the pelvis and upper body, and allows a good seat cushion to unfold its full effect. That is why it is often the more effective investment than a more expensive cushion.
Height and shape
A low backrest leaves the shoulders free and suits active self-propellers: it ends below the shoulder blades so that the propulsion movement remains unrestricted. A high backrest supports up into the shoulder area and is the right choice when the trunk needs additional support. The side contour determines how much guidance the trunk receives: flat for freedom of movement, pronounced for hold.
What matters when choosing
The backrest width matches the seat width. You choose the height according to trunk control. The recline angle determines the pelvic position and should be adjustable. And the mounting must suit the backrest tubes: measure the diameter and check whether the backrest should be removable for folding or loading.
Our tip
After fitting a backrest system, the seat depth changes by the thickness of the shell. Afterwards, check the distance to the back of the knee so that the seat surface still fits and distributes pressure well.