Seat cushions
A seat cushion plays a part in deciding how long you can sit comfortably and with pressure relief in a wheelchair. Foam, visco foam and fluid distribute pressure differently – the choice depends on sitting time and skin risk.
We stock the wheelchair cushions from JAY (including Basic, Easy Fluid, Easy Visco, J2, LITE, LitePro, Balance with Cryo Fluid, Soft Combi P, Xtreme Active and Zip for children), the Matrx Libra from Invacare, wedge cushions and incontinence covers from Mobilex as well as seat cushions from Bischoff & Bischoff.
Measure the seat surface of your wheelchair and pay attention to height, material and weight range. The details are given in the features.
Sitting comfortably, upright and stable
A good seat cushion combines two qualities: it distributes pressure over as large an area as possible and gives the pelvis stable support, so that the upper body stays upright and free. Good cushions combine a shaping base with a pressure-distributing surface for this.
The materials and what they do
Foam is light, inexpensive and dimensionally stable, a good choice for people who transfer and reposition themselves comfortably. Gel distributes pressure very well and dissipates heat, but is somewhat heavier. Air-cell cushions offer the greatest pressure relief and are intended for anyone who needs particularly high relief; the inflation pressure should be checked regularly. Combinations bring together the advantages of several materials.
What matters when choosing
The dimensions are based on the seat surface of the chair, not on the body, so that the cushion lies flat at the edges. The height changes the seat height and with it the reaching angle to the wheel and the clearance under tables. The cover is best breathable and washable, and if needed also suitable for incontinence.
Our tip
For air-cell cushions, it is worth checking the inflation pressure, ideally once a week. The correct setting is reached when about two centimetres of air remain between the sitting bones and the base of the cushion.