Slide boards
A transfer board bridges the gap between two seating surfaces, for example between a wheelchair and a bed, car or toilet. You slide across sideways instead of being lifted.
From Mobilex we carry transfer boards made of polypropylene (including 650 × 245 mm, 800 × 245 mm and curved) and of PVC (800 × 245 mm), as well as a patient transfer board 1,500 mm in length.
The length must safely bridge the gap between the two surfaces. Also pay attention to the load capacity; it is given in the features.
Mobilex curved transfer board made of polypropylene, 800 x 348 x 6 mm (L x W x H)
Mobilex patient transfer board made of polypropylene, 1500 x 700 x 6 mm (L x W x H)
This is how simply it works
The board is pushed with one end under the buttocks and rests with the other on the target surface. You then slide across in small steps, supporting yourself with your hands at the sides. The body stays on the support throughout, a safe and calm transfer from bed, armchair or car into the wheelchair and back.
Straight, curved or with a swivel seat
A straight board is the basic form: ideal between a bed and a wheelchair when both are parallel. Curved boards bridge an angle and are intended for the car, where you cannot approach in parallel. Boards with an integrated swivel seat take over the sliding movement: the seat surface glides, not the body. This protects skin and strength and is somewhat more expensive.
Selection criteria
The length depends on the gap to be bridged plus support on both sides. Choose the load capacity with a margin. The surface also plays a role: smooth surfaces slide more easily, grippy surfaces hold better. If you transfer alone, a slippery surface will feel comfortable; where a carer assists, a bit more grip is pleasant.
Good to know
The transfer board works especially well with a wheelchair if the armrest is removable or swings away. Try this out beforehand on your own chair, and then nothing stands in the way of daily use.