PRO ACTIV LIFT activ mechanically height-adjustable lightweight wheelchair
- Genus: Height-adjustable lightweight wheelchair, rigid-frame construction
- Lifting travel: 30 cm, infinitely variable, mechanical via gas springs
- Payload: up to 100 kg
- Total weight: ab 14,5 kg
- Seat width / seat depth: 35 to 46 cm / 35 to 48 cm
- Backrest height / lower leg length: 20 to 48 cm / 30 to 48 cm
- Seat height rear / front: 41 to 43 cm / 45 to 51 cm
- Tipping point: 6 to 10 cm, in 1 cm increments
- Drive wheels: 24, 25 or 26 inch, camber 1°, 2.5° or 4°
€8,816.80
Free shipping
Available, delivery time: 6-8 weeks
Question about this product
Tell us about your device and we will let you know whether the part fits.
Prefer WhatsApp? You can send us a photo of the type plate or the part here via WhatsApp.
Product information "PRO ACTIV LIFT activ mechanically height-adjustable lightweight wheelchair"
Whether in the kitchen, in the office, at the counter or in the supermarket: with the PRO ACTIV LIFT activ mechanical you can often reach wall cabinets, shelves, printers and machines without any conversion work. The seat lifts steplessly by up to 30 cm, and this with a total weight from 14.5 kg. The height-adjustable lightweight wheelchair is made to your measurements.
Lift without battery
The manual seat height adjustment works with individually matched gas springs. They release the lifting function via an ergonomic handle; with little muscle power the seat then lifts upward. The release handle can be locked, so it can also serve as a standing aid without triggering the lifting function. At its highest setting, according to the manufacturer, you are at eye level with a standing person of about 1.75 m height.
Easy to transport
The chassis is a rigid frame design with welded construction, and the seat unit is bolted to the chassis. For transport, you can disassemble the wheelchair into modules without tools and fold down the backrest. With the option of a backrest tube with lordosis joint (from a backrest height of 35 cm), the backrest can additionally be folded down at the level of the lumbar support, which reduces the packed dimensions. The backrest can only be folded down completely from a seat width of 41 cm; for widths up to 40 cm, the order form recommends the lordosis joint.
Fit and standing up
Seat width (35 to 46 cm), seat depth (35 to 48 cm, short frame 43 cm or long frame 47 cm), backrest height (20 to 48 cm) and lower leg length (30 to 48 cm) are selectable in 1 cm steps. The tilt point (6 to 10 cm) can be adjusted subsequently. The frame front is available in G-shape or V-shape with knee angle 100° or 105°. For users with residual leg function, the manufacturer additionally describes use as a standing aid; for this, the detachable, swing-away frame front with split footrest is suitable.
The highlights at a glance
- Seat height adjustment: Mechanically via gas springs, infinitely adjustable by 30 cm
- Total weight: ab 14,5 kg
- Payload: up to 100 kg
- Dimensions: Seat width 35 to 46 cm, seat depth 35 to 48 cm, backrest height 20 to 48 cm
- Tipping point: 6 to 10 cm, adjustable afterwards
- Wheel camber: 1°, 2.5° or 4°
- Optional: Integral parking brake, e-motion M25, lordosis joint
What you can configure
Selectable are frame length (short or long), frame front and knee angle, push handles, backrest and backrest equipment, seat upholstery (Body Contour or open strap system) and seat cushion, clothing protection and armrests, drive wheels with 24, 25 or 26 inch, castor camber, braking system (knee-lever braking system or integral parking brake), footrest, castors, handrims, tyres and accessories. You choose the frame colour from powder coatings, special colours or in a two-tone design.
Use and notes
According to the instructions for use, the LIFT activ is designed for level, firm surfaces indoors and outdoors; slopes of more than 10% should not be driven on. The maximum obstacle height is 10 cm, the turning radius approx. 1.3 m without and approx. 1.1 m with manoeuvring. According to the manufacturer, the LIFT activ is currently not approved as a seat in motor vehicles, and a force-node (tie-down) system is currently not available.
| Back height: | 20 to 48 cm |
|---|---|
| Braking system: | Lever-operated knee brake |
| Frame type: | Rigid frame |
| Maximales Nutzergewicht: | 100 kg |
| Product family: | PRO ACTIV LIFT |
| Product type: | Height-adjustable lightweight wheelchair |
| Seat depth: | 35 to 48 cm |
| Seat height adjustment: | 30 cm mechanical |
| Seat width: | 35 to 46 cm |
| Total weight: | ab 14.5 kg |
| Wheel size: | 24", 25", 26" |
- Download "Gebrauchsanweisung" (3.83 MB)
- Download "Konformitätserklärung" (69.08 KB)
- Download "Prospekt" (2.33 MB)
PRO ACTIV Reha-Technik GmbH
Im Hofstätt 11
72359 Dotternhausen
Germany
Email: info@proactiv-gmbh.de
Telephone: +49 7427 9480-0
The manufacturer is established in the European Union and is also the responsible person.
PRO ACTIV Reha-Technik GmbH
Im Hofstätt 11
72359 Dotternhausen
Germany
Email: info@proactiv-gmbh.de
Telephone: +49 7427 9480-0
- Genus: Height-adjustable lightweight wheelchair, rigid-frame construction
- Lifting travel: 30 cm, infinitely variable, mechanical via gas springs
- Payload: up to 100 kg
- Total weight: ab 14,5 kg
- Seat width / seat depth: 35 to 46 cm / 35 to 48 cm
- Backrest height / lower leg length: 20 to 48 cm / 30 to 48 cm
- Seat height rear / front: 41 to 43 cm / 45 to 51 cm
- Tipping point: 6 to 10 cm, in 1 cm increments
- Drive wheels: 24, 25 or 26 inch, camber 1°, 2.5° or 4°
0 of 0 reviews
Average rating of 0 out of 5 stars
Login