PRO ACTIV LITTY 4all children's wheelchair
- Genus: Children's wheelchair with notch adjustment
- Payload: up to 50 kg
- Total weight: ab 6,7 kg
- Seat width / seat depth: 18 to 34 cm (2 cm increments) / 20 to 35 cm (5 cm increments)
- Backrest height / lower leg length: 20 to 35 cm (5 cm increments) / 20 to 44 cm
- Seat height rear / front: 31 to 41 cm / 34 to 44 cm
- Tipping point: 5 to 9 cm, depending on wheel size (20 inch: 5 to 7 cm, 22 inch: 6 to 8 cm, 24 inch: 7 to 9 cm)
- Drive wheels: 20, 22 or 24 inch, camber 11°
- Turning radius: approx. 1 m without, approx. 0.8 m with manoeuvring
€4,344.20
Free shipping
Available, delivery time: 6-8 weeks
Question about this product
Tell us about your device and we will let you know whether the part fits.
Prefer WhatsApp? You can send us a photo of the type plate or the part here via WhatsApp.
Product information "PRO ACTIV LITTY 4all children's wheelchair"
A lightweight children's wheelchair that grows with the child and can be adjusted in steps: The PRO ACTIV LITTY 4all is designed for small adventurers. It is supplied in drive wheel sizes 20, 22 or 24 inch and can be adjusted over a wide range to fit your child.
Lightweight, manoeuvrable, low rolling resistance
The total weight starts at 6.7 kg. With its low rolling resistance, the LITTY 4all is, according to the manufacturer, also suitable for children with limited arm strength. According to the instructions for use, the turning radius is approx. 1 m without and approx. 0.8 m with manoeuvring.
Adjustable via notch
You set the seating position and the position of the seat plate using a fixed grid in the clothing guard. This allows you to change seat height, seat tilt, backrest shell tilt and seat depth. The footrest offers a wide adjustment range for leg position and lower leg length. Nine frame parameters can be selected, five on the frame and four on the chassis. The seat width ranges from 18 to 34 cm in 2 cm steps, seat depth and backrest height from 20 to 35 cm in 5 cm steps, and lower leg length from 20 to 44 cm in 1 cm steps. The tilt point is at 5 to 9 cm.
Growth adjustment and abduction
By exchanging assembly groups – depending on the desired change in seat width, axle tube, seat plate, backrest shell, rear backrest crossbar and others – the LITTY 4all can grow with the child. The frame design without restricting front frame tubes allows seating positioning with maximum abduction.
Brakes, back and seat
The knee-lever brake is operated within the child's reach in the clothing guard, with the brake pin positioned well below the centre of the drive wheel. For the accompanying person, there is a locking knee-lever brake on the push handle. According to the manufacturer, the aluminium backrest shell offers good freedom of movement and a shaped sag for lateral stability; the seat plate is a stable seating system without sag.
The highlights at a glance
- Total weight: ab 6,7 kg
- Payload: up to 50 kg
- Frame: nine selectable parameters, seat width from 18 cm
- Adjustment: Seat height, seat angle and seat depth via notches in the clothing guard
- Wheel sizes: 20, 22 or 24 inch, camber 11°
- Abduction: maximum abduction possible
- Accessories: Therapy table, outdoor wheel attachment with 12-inch wheel
What you can configure
Selectable are drive wheel size (20, 22 or 24 inches) and the dimensions dependent on it, push handles, backshell with back cushion, seat plate and seat cushion, braking system, footrest (fixed or flip-back to the rear), casters from 3 to 5 inches, handrims, tyres and anti-tip wheels. The frame colour can be selected from powder coatings, special colours or in two-tone design. Accessories include a therapy table with removable table top, a pelvic belt and the outdoor wheel attachment, which lifts the casters off the ground and is fitted tool-free via a quick-release clamp.
Use and notes
According to the instructions for use, the LITTY is designed for level, firm ground indoors and outdoors; gradients of more than 10 % should not be travelled. According to the manufacturer, the LITTY 4all is not approved as a seat in a motor vehicle. Fitting a wheelchair power drive is not intended for the LITTY 4all.
| Back height: | 20 to 35 cm |
|---|---|
| Braking system: | Lever-operated knee brake |
| Maximales Nutzergewicht: | 50 kg |
| Product family: | PRO ACTIV LITTY |
| Product type: | Children's wheelchair |
| Seat depth: | 20 to 35 cm |
| Seat width: | 18 to 34 cm |
| Tipping point: | 5 to 9 cm |
| Total weight: | ab 6.7 kg |
| Wheel size: | 20", 22", 24" |
- Download "Gebrauchsanweisung" (1.84 MB)
- Download "Konformitätserklärung" (70.20 KB)
- Download "Prospekt" (845.80 KB)
PRO ACTIV Reha-Technik GmbH
Im Hofstätt 11
72359 Dotternhausen
Germany
Email: info@proactiv-gmbh.de
Telephone: +49 7427 9480-0
The manufacturer is established in the European Union and is also the responsible person.
PRO ACTIV Reha-Technik GmbH
Im Hofstätt 11
72359 Dotternhausen
Germany
Email: info@proactiv-gmbh.de
Telephone: +49 7427 9480-0
- Genus: Children's wheelchair with notch adjustment
- Payload: up to 50 kg
- Total weight: ab 6,7 kg
- Seat width / seat depth: 18 to 34 cm (2 cm increments) / 20 to 35 cm (5 cm increments)
- Backrest height / lower leg length: 20 to 35 cm (5 cm increments) / 20 to 44 cm
- Seat height rear / front: 31 to 41 cm / 34 to 44 cm
- Tipping point: 5 to 9 cm, depending on wheel size (20 inch: 5 to 7 cm, 22 inch: 6 to 8 cm, 24 inch: 7 to 9 cm)
- Drive wheels: 20, 22 or 24 inch, camber 11°
- Turning radius: approx. 1 m without, approx. 0.8 m with manoeuvring
0 of 0 reviews
Average rating of 0 out of 5 stars
Login
More products by PRO ACTIV