PRO ACTIV SPEEDY F3 rigid frame wheelchair
- Genus: Rigid-frame wheelchair with welded frame
- Payload: Standard up to 120 kg; Heavy Duty equipment up to 200 kg
- Total weight: from 8.5 kg in the basic specification
- Seat width / seat depth: 25–55 cm / 23–55 cm
- Backrest height / lower leg length: 20–60 cm / 35–52 cm
- Tipping point: −5 to 17 cm (fixed, not adjustable)
- Wheel camber: 1°, 2.5°, 4° or 6°
- Drive wheels: 24, 25 or 26 inch
€5,949.20
Free shipping
Available, delivery time: 6-8 weeks
Question about this product
Tell us about your device and we will let you know whether the part fits.
Prefer WhatsApp? You can send us a photo of the type plate or the part here via WhatsApp.
Product information "PRO ACTIV SPEEDY F3 rigid frame wheelchair"
For those who know exactly how their wheelchair should sit and drive: The PRO ACTIV SPEEDY F3 is a rigid-frame wheelchair with a fully welded frame and filigree design. Seating position and tilt point are tailored to you – the manufacturer recommends it to experienced wheelchair users who can clearly state their requirements.
Slim frame, matched to your leg insertion
14 frame parameters are selectable. Thanks to the individual frame front extension, the desired leg position can be achieved, a frame inset is selectable, and the knee angle can be individually set for a compact or comfortable seating position. The axle is permanently welded to your measurements; according to the manufacturer, this brings weight advantages. Tilt point and rear seat height can no longer be adjusted afterwards, only the front seat height via other castor forks and casters. The castor bearing blocks are angle-adjustable according to the order form. The total weight starts at 8.5 kg in the basic equipment.
Stable for towing device, handbike and drives
The frame is designed for a maximum payload of 120 kg in the standard version; with the Heavy-Duty equipment the manufacturer specifies up to 200 kg. Tow vehicles and adaptive bikes can be coupled via adapters. If the standard base mounting plate is fitted, a removable wheelbase extension can be installed without tools; it adds no extra weight to the wheelchair. Alternatively, a wheelbase extension permanently welded to the frame can be selected – intended for users who regularly use a tow vehicle or handbike. Wheelchair drives such as e-fix, e-motion M25 or e-motion DuoDrive are compatible on request.
The highlights at a glance
- Frame: fully welded, 14 selectable parameters, frame width and seat angle selectable
- Dimensions: Seat width 25–55 cm, seat depth 23–55 cm, backrest height 20–60 cm, lower leg length 35–52 cm
- Weight: Total weight from 8.5 kg in basic equipment
- Load: Standard up to 120 kg payload; heavy-duty equipment up to 200 kg
- Wheel camber: 1°, 2.5°, 4° or 6°
- Wheelbase extension: removable without tools or permanently welded
- Drive wheels: 24, 25 or 26 inch
- Safety: crash-tested according to the manufacturer
Your SPEEDY F3 made to measure – the configuration
Every SPEEDY F3 is a custom build. According to the order form, the following options are available, among others: frame colour from powder coatings (for example White, Black, Anthracite, Red, Yellow, Pastel Blue), Dormant powder coatings, special colours in wet paint, two-tone design (base colour at the rear, design colour at the front), uncoated raw blasted, or frame colour to RAL specification; steering fork and bearing block in Silver or Black. In addition, there are brakes, footrests, push handles, back and seating systems, clothing guards, armrests, and drive and steering wheels. For the back and seating systems, adjustable backs with back cushion, back shell, Body Contour seat upholstery or open strap system, as well as various seat cushions are available. Drive wheels are available with aluminium rim and 36 spokes, double-walled rims or Spinergy wheels, plus pushrims in stainless steel, aluminium or titanium, ergonomic profiles such as Curve and Gekko, and silicone covers. In the standard equipment the backrest is lightly and firmly bolted; optionally it is available as 7-position angle-adjustable and folding without tools.
Use and fit
The manufacturer describes the wheelchair for use on level and firm surfaces indoors and outdoors; obstacles up to 10 cm high can be driven over, and the turning radius is approx. 1.3 m without manoeuvring. Operating instructions and declaration of conformity can be found under Downloads.
| Back height: | 20 to 60 cm |
|---|---|
| Frame type: | Rigid frame |
| Maximales Nutzergewicht: | 120 kg |
| Product family: | PRO ACTIV SPEEDY |
| Product type: | Rigid frame wheelchair |
| Seat depth: | 23 to 55 cm |
| Seat width: | 25 to 55 cm |
| Total weight: | ab 8.5 kg |
| Wheel size: | 24", 25", 26" |
- Download "Gebrauchsanweisung SPEEDY F2 und F3" (4.21 MB)
- Download "Konformitätserklärung SPEEDY F3" (70.04 KB)
- Download "Prospekt" (2.53 MB)
PRO ACTIV Reha-Technik GmbH
Im Hofstätt 11
72359 Dotternhausen
Germany
Email: info@proactiv-gmbh.de
Telephone: +49 7427 9480-0
The manufacturer is established in the European Union and is also the responsible person.
PRO ACTIV Reha-Technik GmbH
Im Hofstätt 11
72359 Dotternhausen
Germany
Email: info@proactiv-gmbh.de
Telephone: +49 7427 9480-0
- Genus: Rigid-frame wheelchair with welded frame
- Payload: Standard up to 120 kg; Heavy Duty equipment up to 200 kg
- Total weight: from 8.5 kg in the basic specification
- Seat width / seat depth: 25–55 cm / 23–55 cm
- Backrest height / lower leg length: 20–60 cm / 35–52 cm
- Tipping point: −5 to 17 cm (fixed, not adjustable)
- Wheel camber: 1°, 2.5°, 4° or 6°
- Drive wheels: 24, 25 or 26 inch
0 of 0 reviews
Average rating of 0 out of 5 stars
Login